- 34 -
DXE-RADW - 500K or 1000K Radial Wire Kits and Components
To achieve optimal performance with a ground-mounted vertical, install as many radials as possible. These bulk radial wire kits
use insulated wire that is UV resistant, hard to see and lays down easily, unlike the wire that is commonly available at the big box
stores. It will last much longer in contact with soil than bare wire.
The DXE-RADW- 500K or 1000K kit provide everything you will need to build the perfect radial system!
500/1000 ft. spool of 14 AWG, stranded copper wire with vinyl insulation
20/40 lugs
100/200 radial wire anchor pins- Eliminating the need to bury your radials!
Build up to 20/40 radials, 25 feet long
DXE-RADW-500K
Bulk Radial Wire Kit, 500 ft Spool of Wire, 20 Lugs, 100 Staples
DXE-RADW-1000K
Bulk Radial Wire Kit, 1000 ft Spool of Wire, 40 Lugs, 200 Staples
DXE-RADW-500KBD or 1000KBD - Bulk Radial Wire Kits and Components
To achieve optimal performance with a ground-mounted vertical, install as many radials as possible. These bulk radial
wire kit use insulated wire that is UV resistant, hard to see and lays down easily, unlike the wire that is commonly
available at the big box stores. It will last much longer in contact with soil than bare wire. The biodegradable anchors
allow easy installation of radial wires, and will degrade and disappear in a year or so when they are no longer needed.
The DXE-RADW-500 or 1000KBD kit provide everything you will need to build the perfect radial system!
500/1000 ft. spool of 14 AWG, stranded copper wire with vinyl insulation
20/40 lugs
100/200 biodegradable radial wire anchor pins- Eliminating the need to bury your radials!
Build up to 20/40 radials, 25 feet long
DXE-RADW-500KBD
Bulk Radial Wire Kit, 500 ft Spool of Wire, 20 Lugs, 100 Biodegradable Staples
DXE-RADW-1000KBD
Bulk Radial Wire Kit, 1000 ft Spool of Wire, 40 Lugs, 200 Biodegradable Staples
DXE-STPL - Radial Wire Anchor Pins, 100/pack - No need to bury your radials!
DX Engineering Radial Wire Anchor Pins are perfect for fastening radials below the grass line to eliminate the risk of damaging your
radials during lawn maintenance.
100 count - 6'' Pins
11-Gauge
DXE-STPL-100P
Radial Wire Anchor Pins, 100/pack
DXE-STPL-300P
Radial Wire Anchor Pins, 300/pack
SUM-900031 - Automatic Wire Stripper/Crimper/Cutter, 24-10 Ga.
Our DX Engineering wire stripper uses a spring-loaded design to make quick work of wires ranging from 24 to 10 gauge. Just insert
the wire, squeeze the handle, and listen for the click. That’s the sound of another perfect wire stripping job
performed in about 2 seconds- a fraction of the time it takes your pocket knife to do the same job. An adjustable
wire length guide helps you make uniform strips, and a built-in wire cutter and crimper helps you complete your
wiring job.
Spring-loaded design
Strips wires ranging from 24 to 10 gauge
built-in wire cutter and crimper
DXE-T001 - DX Engineering SO-239 Connector Installation Tool Kit
This DX Engineering SO-239 connector installation tool kit offers an easier installation of chassis or bulkhead mount SO-239 coaxial
connectors. Having the right tools can make all of the difference in your shack, and this handy DXE tool provides
you with a special dual-use stainless steel wrench, plus a multipurpose 6-in-1 screwdriver/nut driver tool. One end
of the wrench is a 3/4 in. semi-box wrench with a pass-through for coaxial cable--perfect for tightening the larger
nuts used to mount bulkhead connectors. The other end is a 3/16 in. box wrench for tightening mounting nuts with
SO-239 hardware. You'll receive six combinations - two Phillips heads, two flatheads, and a 1/4 in. nut driver and
a 5/16 in. nut driver, which store in the handle of the screwdriver. The added SO-239 wrench is ideal for use with
the
DXE-UHF-FDFB-KIT
- Silver Plated Female SecureMount
™
Bulkhead Connector.
