- 21 -
DXE-RADW-20RT/32RT/65RT Pre-Assembled, Radial Wire, with 1/4" ring Terminals, 20 Pack
The DXE-RADW-Radial Wire Kits include the highest quality 14 gauge stranded copper wire with a relaxed black PVC insulation
for easy installation of your radial system. They allow fast and easy installation of your radial ground system, and permit you to mix
and match different length to fit the available space. The stranded wire and relaxed insulation mean that the wire will lay flat as you
place it on the ground - easy to install. The twenty pre-cut radial wires include 1/4" ring terminals professionally crimped on one end
for quick and easy attachment to the radial plate. These Radial Wire Kits are designed for users of vertical antenna systems which
have the need for a high quality radial system for optimum antenna performance. The 1/4" ring terminals are machine crimped for
maximum grip. Soldering is not required for strength, but is recommended if installed in corrosive environments such as salt spray.
•
Packed 20 Radial Wires per package, 14 gage, stranded copper wire, Black relaxed PVC insulation, 1/4"
Ring Terminal professionally crimped on each Radial Wire, 3 lengths to choose from: 20 Ft (-20RT), 32
Ft (-32RT), 65 Ft (-65RT)
DXE-STPL-100BD - Radial Wire Staple, Biodegradable, 3", 100 pack
DX Engineering DXE-STPL-100BD is a 100-pack of 3”
biodegradable
anchors that are produced from recycled PLA
(Polylactide Resin). Depending on the weather conditions, they will degrade in about a year. They are easily installed and
will hold radial wires in place until lawn roots overtake them - and then disappear. Ecologically friendly!
DXE-225RT-20 - Ring terminal 16-14 Wire Gauge, 1/4" hole, 20-pack
This is a set of 20 ring terminals for AWG #14 to 16 wire with a clearance hole for a 1/4" bolt. These are the same crimp
terminals supplied with the DXE Radial Wire Kits for #14 Radial and Antenna Wire.
SUM-900031 - Automatic Wire Stripper/Crimper/Cutter, 24-10 Ga.
Our DX Engineering wire stripper uses a spring-loaded design to make quick work of wires ranging from 24 to 10
gauge. Just insert the wire, squeeze the handle, and listen for the click. That’s the sound of another perfect wire
stripping job performed in about 2 seconds- a fraction of the time it takes your pocket knife to do the same job. An
adjustable wire length guide helps you make uniform strips, and a built-in wire cutter and crimper helps you
complete your wiring job.
•
Spring-loaded design
•
Strips wires ranging from 24 to 10 gauge
•
built-in wire cutter and crimper
TES-2155 - 3M Temflex™ 2155 Rubber Splicing Tape
.
Conformable self-fusing rubber electrical insulating tape. It is designed for low voltage electrical insulating and moisture
sealing applications. For outdoor use, it should be protected from UV deterioration with an overwrap of
TES-06132
TES-06132 - Scotch
®
Super 33+
.
Highly conformable super stretchy tape for all weather applications. This tape provides flexibility and easy handling for
all around performance. It also combines PVC backing with excellent electrical insulating properties to provide primary
electrical insulation for splices up to 600V and protective jacketing.
DXE-22600 - Deburring Tool with Extending Handle and 2 Blades
Handy for cleaning burrs after cutting or drilling aluminum or steel. This rugged hand tool features an adjustable length blade holder
to allow access to burrs deep inside tubing or other hard to reach places. Extremely versatile and handy.
•
Includes one blade for aluminum and steel and one blade for cast iron and brass.
•
Holder telescopes from 1⁄2" to 5" for long reach inside objects.
•
Handle has storage compartment for spare blades.
•
Blade can be inserted at 90° for deburring cross holes.
DXE-RADW-20RT
Package of 20 each 20 Ft Radials with 1/4" Ring Terminals
DXE-RADW-32RT
Package of 20 each 32 Ft Radials with 1/4" Ring Terminals
DXE-RADW-65RT
Package of 20 each 65 Ft Radials with 1/4" Ring Terminals
