- 23 -
DXE-GUY-Kits - Guying Kit for Vertical Antennas
Some vertical manufacturers indicate their antennas do not need guying. During times of high winds or ice loading, some
of these verticals may sustain damage or fail altogether. With the small amount of effort needed to install a four point
guying system, the risk hardly seems worth taking. A four-point guying scheme provides the best mechanical advantage to
reduce wind stress, regardless of direction. A four point guying system is recommended for use with a DX Engineering
Tilt Base, because just one of the guy ropes has to be loosened when you tilt the vertical down. The remaining guys help
stabilize the vertical in three directions when being raised. These Vertical Guying kits have been designed to be used with
ground mounted vertical antenna systems. The guying kits are ideal for fixed or portable installations.
DXE-GUY100-KIT
4 - Heavy Duty screw-in earth anchors with eyelets
1 - 100 ft Roll - UV resistant, 3/32 Double-Braided Dacron Polyester Rope SYN-DBR-94-100
DXE-GUY200-KIT
4 - Heavy Duty screw-in earth anchors with eyelets
2 - 100 ft Rolls - UV resistant, 3/32 Double-Braided Dacron Polyester Rope SYN-DBR-94-100
DXE-GUY400-KIT
4 - Heavy Duty screw-in earth anchors with eyelets
4 - 100 ft Rolls - UV resistant, 3/32 Double-Braided Dacron Polyester Rope SYN-DBR-94-100
DXE-GUY1000-KIT
4 - Heavy Duty screw-in earth anchors with eyelets
1 - 1000 ft Roll - UV resistant, 3/32 Double-Braided Dacron Polyester Rope SYN-DBR-94-1000
DXE-22600 - Deburring Tool with Extending Handle and 2 Blades
Handy for cleaning burrs after cutting or drilling aluminum or steel. This rugged hand tool features an adjustable length blade holder
to allow access to burrs deep inside tubing or other hard to reach places. Extremely versatile and handy.
Includes one blade for aluminum and steel and one blade for cast iron and brass.
Holder telescopes from 1⁄2" to 5" for long reach inside objects.
Handle has storage compartment for spare blades.
Blade can be inserted at 90° for deburring cross holes.
Technical Support
If you have questions about this product, or if you experience difficulties during the installation,
contact DX Engineering at (330) 572-3200. You can also e-mail us at:
For best service, please take a few minutes to review this manual before you call.
Warranty
All products manufactured by DX Engineering are warranted to be free from defects in material and workmanship for a period of one (1) year from
date of shipment. DX Engineering’s sole obligation under these warranties shall be to issue credit, repair or replace any item or part thereof which is
proved to be other than as warranted; no allowance shall be made for any labor charges of Buyer for replacement of parts, adjustment or repairs, or
any other work, unless such charges are authorized in advance by DX Engineering. If DX Engineering’s products are claimed to be defective in
material or workmanship, DX Engineering shall, upon prompt notice thereof, issue shipping instructions for return to DX Engineering (transportation-
charges prepaid by Buyer). Every such claim for breach of these warranties shall be deemed to be waived by Buyer unless made in writing. The above
warranties shall not extend to any products or parts thereof which have been subjected to any misuse or neglect, damaged by accident, rendered
defective by reason of improper installation, damaged from severe weather including floods, or abnormal environmental conditions such as prolonged
exposure to corrosives or power surges, or by the performance of repairs or alterations outside of our plant, and shall not apply to any goods or parts
thereof furnished by Buyer or acquired from others at Buyer’s specifications. In addition, DX Engineering’s warranties do not extend to other
equipment and parts manufactured by others except to the extent of the original manufacturer’s warranty to DX Engineering. The obligations under
the foregoing warranties are limited to the precise terms thereof. These warranties provide exclusive remedies, expressly in lieu of all other remedies
including claims for special or consequential damages. SELLER NEITHER MAKES NOR ASSUMES ANY OTHER WARRANTY
WHATSOEVER, WHETHER EXPRESS, STATUTORY, OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND
FITNESS, AND NO PERSON IS AUTHORIZED TO ASSUME FOR DX ENGINEERING ANY OBLIGATION OR LIABILITY NOT STRICTLY
IN ACCORDANCE WITH THE FOREGOING.
©DX Engineering 2013
DX Engineering
®
, DXE
®
, DX Engineering, Inc.
®
, Hot Rodz®, Maxi-Core
®
, DX Engineering THUNDERBOLT
®
, DX Engineering Yagi Mechanical
®
,
EZ-BUILD
®
, TELREX
®
and Gorilla Grip
®
Stainless Steel Boom Clamps, are trademarks of PDS Electronics, Inc. No license to use or reproduce any
of these trademarks or other trademarks is given or implied. All other brands and product names are the trademarks of their respective owners.
Specifications subject to change without notice.
Summary of Contents for DXE-60VA-1P
Page 15: ...14 Figure 10...
