- 28 -
UMI-81343, DXE-NSBT8 - Anti-Seize & Never-Seez®
An Anti-seize compound MUST be used on any Stainless Steel nuts, bolts, clamps or other hardware to prevent galling and
thread seizure. Any of these products can be used for this purpose.
*
UMI-81343
Anti-Seize, 1 oz. Squeeze Tube
*
UMI-81464
Anti-Seize, 8.5 oz. Aerosol Can
*
DXE-NSBT8
Never-Seez®, 8 oz. Brush Top
*
DXE-NMBT8
Never-Seez®, 8 oz. Brush Top, Marine Grade
* These products are limited to domestic UPS Ground shipping only
DXE-P8A - Penetrox™ A Anti-Oxidant - 8 oz. Squeeze Bottle
Use Penetrox™ A electrical joint compound to affect a substantial electrical connection between metal parts
such as telescoping aluminum tubing or other antenna pieces. Ensures high conductivity at all voltage levels
by displacing moisture and preventing corrosion or oxidation. For Aluminum to Aluminum, Aluminum to
Copper, or bare conductors. Not recommended for use with rubber or polyethylene insulated wire.
8 oz. squeeze bottle
* This product is limited to domestic UPS Ground shipping only
DXE-RADW - 500K or 1000K Radial Wire Kits and Components
To achieve optimal performance with a ground-mounted vertical, install as many radials as possible. These bulk radial wire kits
use insulated wire that is UV resistant, hard to see and lays down easily, unlike the wire that is commonly available at the big box
stores. It will last much longer in contact with soil than bare wire.
The DXE-RADW- 500K or 1000K kit provide everything you will need to build the perfect radial system!
500/1000 ft. spool of 14 AWG, stranded copper wire with vinyl insulation
20/40 lugs
100/200 radial wire anchor pins - Eliminating the need to bury your radials!
Build up to 20/40 radials, 25 feet long
DXE-RADW-500K
Bulk Radial Wire Kit, 500 ft. Spool of Wire, 20 Lugs, 100 Staples
DXE-RADW-1000K
Bulk Radial Wire Kit, 1000 ft. Spool of Wire, 40 Lugs, 200 Staples
DXE-VMN-1 - Vertical Antenna Matching Network
The
DXE-VMN-1
Vertical Antenna Matching Network is custom designed for use with base-fed quarter wave
resonant vertical antenna systems. In some vertical antenna installations with excellent radial systems, achieving the
best SWR on a resonant vertical for 80 meters may be difficult without some means of adjusting feedpoint
impedance. The
DXE-VMN-1
allows easy adjustment for lowest SWR. The
DXE-VMN-1
Vertical Antenna
Matching Network will aid in tuning a low impedance antenna to the minimum SWR in the customer selected portion
of the 80 meter band. The #12 AWG coil wire is tin-nickel plated for high power handling, corrosion resistance, ease
of soldering and long term reliability.
As an added benefit, the
DXE-VMN-1
will act as a static bleed for your
vertical antenna in areas where precipitation or snow static is present. The Vertical Matching Network may be
installed between ground and the feedpoint of any quarter wave base-fed vertical antenna - including mobile antennas.
It
CANNOT
be used on non-resonant antenna such as a 43 foot vertical.
DXE-KIT-DBR - DX Engineering Tube Deburring Tool Kit
Designed and manufactured in the USA, DX Engineering Tube Deburring Tools feature hardened steel cutting
surfaces arranged in a conical shape. Both the interior and exterior of the tool's cone may be used to smooth the rough
edges of the inside and outside of the cut ends of pipe and tubing. Its rotational symmetry allows easy reaming and
deburring rough-cut tubing edges with minimum effort. The UT-2125 is usable on all tubing and pipe sizes from 3/8”
to 2-1/8” OD. The UT-3500 covers sizes from 1-7/8” to 3-1/2” OD. The complete tool kit, model UT-KIT-DBR,
includes both sizes of conical tools, a small hand deburrer and a half round file. DX Engineering Tube Deburring
Tools are reversible, so they are ideal to debur both ID and OD of aluminum tubing prior to telescoping the sections
together. These tools assure a smooth fit without galling and seizing that can occur with the slightest roughness. Only
a couple of revolutions with very light pressure is needed to produce excellent results. DX Engineering Tube
Deburring Tools may be used to debur tubing and pipe made of aluminum, fiberglass, copper, steel, plastic pipe, etc.
