DWMEIGI MG8710 ELECTRIC FOLDING BIKE
7
Specifications of LCD Display
Rated voltage: 48V
Rated working current: 10mA
Maximum working current: 30mA
Off-state leakage current: <1uA
Operating temperature: -20
℃
~ 60
℃
Storae temerature: -30
℃
~ 70
℃
General Operation
To switch on the E-bike system and provide the power supply to the controller, hold the On/Off button
on the remote for 2 seconds.
To switch off the E-bike system, hold the On/Off button for 2s. The E-bike system no longer uses the
battery power.
When E-bike system is switched off, the leakage current is less than 1
μ
A.
When the E-bike is parked for approx. 10 minutes, the E-bike system switches off automatically
.
Please visit our website:
to check the manual of this LCD display, it has
many functions and settings to meet the rider’s requirements.
Riding Instructions
Check before riding it for the first time:
The bicycle was assembled and checked before leaving the factory, nevertheless, before using for the first
time, check the unit thoroughly.
First, check to see whether the battery is fully charged and locked.
Check the air pressure of the tires is normal
Check and make sure the front and rear brakes are working properly
Check the tightness of the front and rear wheels
Check and make sure the handlebar and saddle are fastened tightly enough. Make sure the quick
releases are locked and all lock nuts and screws are tightened.
Riding:
Turn on the power switch (turn the ignition key to" ON” position), the power display indicator will light
on, indicating the unit is powered.
Just like riding a normal bicycle, seat yourself on the saddle. Put one foot on the pedal and do a final check
to see that everything is okay and working well, especially the breaks. Start pedaling, and when you reach
a certain speed, the motor will automatically be activated and start to move your bike. To stop the bicycle
motor, just stop pedaling and the motor will stop automatically. To bring the vehicle to a halt, use the
brake.
The brake will trigger the motor to stop. If either of the brake levers are pulled, the power will be cut off
automatically and the motor will not work.
