background image

DWMEIGI MG708 ELECTRIC TRICYCLE

2

Safety & Warning

Riding can be a hazardous activity. Certain conditions may cause the equipment to fail without

fault of the manufacturer. The product can and is intended to move, and it is therefore possible to

lose control, fall-off and/or get into dangerous situations that no amount of care, instruction or

expertise can eliminate. If such things occur, you can be seriously injured or die, even when using

safety equipment and other precautions. RIDE AT YOUR OWN RISK AND USE COMMON-SENSE.

FAILURE TO USE COMMON- SENSE AND HEED ALL SAFETY WARNINGS AND

RECOMMENDATIONS INCREASES RISK OF INJURY. USE THE PRODUCT ONLY WITH

APPROPRIATE CAUTION AND SERIOUS ATTENTION TO SAFE OPERATION.

Before riding on the road, take time riding in an enclosed area to familiarise yourself with the

controls and behaviours of an electrically assisted bicycle. Try all settings so you are familiar with

the results.

Before every ride, check bicycle condition and ensure that no fasteners are loose, particularly

axles, pedals, seat and handlebars. Ensure that the tyres are inflated to within specification

(printed on the tyre sidewall), and that the brakes are operating correctly.

Maximum load capacity = 120kg.

Understand and obey any local laws or regulations which may affect locations where the product

may be used. Ride defensively.

This product is manufactured for performance and durability but is not impervious to damage.

Stunts or other aggressive riding can over-stress and damage the product, and the rider assumes

all risks associated with how the product is looked after.

Keep fingers and other body parts away from moving components.

Always wear suitable protective equipment, such as an approved safety helmet (with chin strap

securely buckled). A helmet may be legally required by local law or regulation in your area. Wear

suitable footwear for bicycle riding and clothing that helps make you visible to others.

Please read this instruction manual carefully before you ride the electric bike for the first time.

Please always check the brakes prior to riding to make sure they are working correctly. Adjust

the brake sensitivity if needed. Only ride at a speed that the conditions permit, for example, slow

down on snowy or rainy days.

Always hold the handlebars with both hands, except when you need notify others you are turning.

Use a light at night, or when visibility is not good. If you are not able to see clearly with a light, do

not attempt to ride your bike.

Make sure your body and other objects do not come into contact with the chain or the wheels

whilst they are moving.

Never touch the charging connector on the battery case with your hands when they are wet, or

with keys or other metallic objects, in case they damage the battery pole and cause a short circuit.

Wear bright clothing to help make you visible to others when you are riding at night.

Don’t lend the electric bicycle to anyone who doesn’t know how to operate it, or who haven’t

read the manual.

Like other cycles, it can only carry one person, carrying a passenger is not permitted.

To brake, the rider must action both brake levers to the correct degree.

Never ride the electric bike under the influence of drugs or alcohol.

Do not ride under bad conditions, such as on uneven, wet or loose surfaces.

If possible, do not ride in adverse weather conditions, low visibility or if you are very tired.

This electric bicycle can be used in the rain; however, it must not be submerged in water or

puddles. The controller, motor and other electrical devices may be short-circuited, causing

damage and creating possible dangerous situations.

Summary of Contents for MG708


















Reviews: