5. Making sure the tent is sitting evenly, peg out the remaining peg points on the floor. It
may be necessary to re align the corner peg points to ensure the floor sits flat.
6. This tent comes with pre attached guy ropes and webbing straps which must be used at
all times. It is important to not over tension the guy ropes or webbing straps as this can
create excessive stress to the tent and distort its shape.
Packing your tent away
Reverse the pitching instructions to deflate and pack up the tent. Please take note to:
1. Loosen the inner pod webbing straps. Turn the valves letting out all the air – make sure
all the air escapes, the doors are unzipped and then lay the roof evenly on the floor as
flat as you can as this will make the tent easier to fold.
2. Clean and dry all pegs before packing. The tent should be folded from the non valve
side to the valve side to ensure the air can easily escape, making the roll up stage
much easier.
