29 |
P a g e
3-2. Setup – Display Mode
In the SETUP menu, select the DISPLAY tab. Then, the DISPLAY menu is displayed as pictured below. Navigate through
the menu items using the mouse or the control button (
◀
▲
▶
▼
) on the remote control and change the value
of the menu item. To return to the previous setup menu screen, press the ESC button.
Figure 3.2.1. Display Mode Setup Screen
Table 3.2.1. Menu Items in DISPLAY Mode Setup
Item
Description
OSD
Enable/disable on-screen-display.
OSD CONTRAST
Set the visibility level of the On Screen Display (OSD) (0~100)
SEQUENCE
Enable/disable sequential display of video in full screen mode.
SEQ-DWELL TIME
Set the dwell time of each,
single channel display in sequential display mode (3~60seconds)
CHANNEL
Select a channel to apply the name and covert settings change using the
mouse or control button (
◀
▲
▶
▼
) on the remote control.
NAME
Set the channel name. Press the right square button and set the channel
name and select OK using the mouse or the control button (
◀
▲
▶
▼
)
on the remote control. The name can be made by 10 characters at most.
COVERT
Enable/disable display of the specified video channel in live display mode.