background image

L

IMITS AND EXCLUSIONS*

There are no express warranties except as listed. The warrantor will not be liable for incidental 

or consequential damages (including damage to recording media without limitation) resulting 

from the use of these products or arising out of any breach of the warranty. All express and 

implied warranties, including the warranties of merchantability and fitness for particular purpose, 

are limited to the applicable warranty period set forth above. 

Some states do not allow the exclusion or limitation of incidental or consequential damages, or 

limitatons on how long an implied warranty lasts, so the exclusions or limitations listed above 

may not apply to you. This warranty gives you specific legal rights, and you may also have other

rights that vary from state-to-state. 

If the problem is not handled to your satisfaction, then write to the following address: 

Digital Watchdog, Inc. 

ATTN: RMA Department

5436 W. Crenshaw Street

Tampa, FL 33634

Service calls which do not involve defective materials or workmanship as determined by the 

Warrantor, in its sole discretion, are not covered. Costs of such service calls are the responsibility 

of the purchaser. 

32

Summary of Contents for Snapit DWC-V4363DB





































Reviews: