Installation -
Installation Using Mounting Plate
9
Template Sheet
1. Using the mounting template sheet for the
metal plate, or the metal plate itself, mark and
drill the necessary holes in the wall or ceiling.
2. Pass the wires through the mount bracket and
make all necessary connections. See page 12
for more information.
3. To use the camera’s waterproof wiring:
a. Install the LAN cable into (a) .
b. (b) will be assembled to (a) with a 1/4 turn.
c. Thread (c) tightly to (b).
NOTE: to ensure a proper moisture seal,
make sure the o-ring is in place between (a)
and (b). In extreme environments, use an
outdoor-rated sealer.
NOTE: When using the waterproof cap,
crimp the RJ-45 connected after passing the
camera through the waterproof cap.
4. Mount the metal plate to the mounting surface
using the included screws.
5. Assemble the cover over the camera body. Be
sure to assemble the cover and bottom case
to match the case outline.
6. Fix the camera's bottom case to the metal
plate. Press the three (3) bezels on the bottom
care of the camera until it snaps to the metal
plate. A snap sound will confirm the camera
base is properly locked into the mounting
plate.
7. When the installation is completed, remove
the protective film.
6
7
5
4
3
2
a
b
c
