DW DWC-MD44WA, User Manual, Page: 45 / 83

RTSP Information
Setup -
1
2
4
3
5
Time out
Set the RTSP time out.
RTP Multicast
Check RTP Multicast On/Off. To activate RTP Multicast,
1. Click “On” button
2. Enter accessible RTP Multicast IP, port for video stream
control, RTP packet TTL
3. Click “Apply” button.
2
Target Stream
Select the channel you want to set.
1
3
Click ‘Apply’ to make above setting effective.
4
It shows RTSP Connection information.
5
The session is disconnected after the specified time out.
It is possible to set each RTP Multicast for CH1~3.
Click this button when completed setup each channels.
45