Configuration and Operation
37
To enter the password
Select a digit by moving the
Left
or
Right
arrow to move the cursor.
Click
Enter
on the On-Screen Display. After each entry, an ‘X’ is displayed
instead of a dash.
13
Note:
To delete a digit, move the
Down
arrow until
DELETE
is flashing in the
PASSWORD window. Select the digit to delete and click
Enter
in the OSD
keypad. Move the cursor until
ENTER
is flashing again in the PASSWORD
window. Use the
Up
arrow to select the correct digit and click
Enter
in
the OSD keypad.
Move the cursor to the next digit until all four numbers are entered and
ENTER
is flashing in the PASSWORD window.
Click
Enter
in the OSD keypad again to save the password entry. The PASSWORD
window closes and the Main Page opens.
To change the password:
Select
ON
from
SETUP MENU 2
. The NEW PASSWORD menu opens.
Select a digit by moving the
Left
or
Right
arrow.
Click
Enter
on the On-Screen Display keypad.
Note:
To delete a digit, move the
Down
arrow until
DELETE
is flashing. Select
the digit to delete and click
Enter
in the OSD keypad. Select the number
and click
Enter
to delete it.
After entering all digits,
SAVE
flashes on the screen. Click
Enter
in the OSD
keypad to save the new password.
13
13
Caution:
We strongly recommend that you do not change default parameters, which might
impact the analytics performance of the assembly.
Summary of Contents for ioimage CP-2202-361P/N
Page 2: ......