DVTEC DvRigPro Manual Download Page 4

4

 
 
 
 
Using the waist / low mode kit 

 

In order to use in low mode you first have to attach the Balancing cord to the rig. 
Take the loops and put them over the left fixed knob (0) and over the Tilt/Crane knob  
 
Use the supplied shoulder strap and connect one end to the middle of the Balancing 
cord and the other end to the hole in the shoulder brace. 
Adjust the strap length for waist or low position. You can carry it on your right shoulder, 
or over your head. You can also hold the belt in your hand for ground level shots. 
Move the Camcorder all the way to the right in order to clear the LCD monitor from the 
cords. 
When picked up from the ground the Rig will always stay Horizontally balanced. 
The handlebars could be screwed out for even lower camera positioning 

 
 

Maintenance 
 
The Active Suspension pod springs are lubricated with SuperLube®. 
If the pole becomes noisy or does not move freely dismantle the pod and apply 
SuperLube®. Along the two springs and inside the tubes. 
 
Always slightly unlock all four rig’s knobs for storage or transport.  Avoid storing in very 
hot and or very humid places. 

 

Shooting Tips 
 
Do not lean forward or back for tilting, Just release The Tilt /Crane knob (1) then Tilt 
and or Crane to any desired position.  
Adjust the Elevation knob (2) for adjusting the camera height to meet the desired 
objects eye Level.  
When the Tilt/Crane knob (1) is lose, you can make extreme ground or ceiling shoots. 
You can "Dutch" freely; the elastic joint will support the camera in any position. 
For walking or running shoots, Make sure all knobs are locked. 
For shooting sitting people or children, unlock knobs 1,2 position the camera as low as 
possible and lock, for extra stability use the Short Pod Accessory.  
Using the support belt and pod are recommended but not necessary, some users 
prefer not to use the pod in certain shoots. 
For best performance always apply forward pressure on the handlebars. This will keep 
the Shoulder brace in the right position. 
 
Visit  

www.dvtec.tv

 for more shooting tips, Camera positions and accessories. 

 
 
 

Summary of Contents for DvRigPro

Page 1: ...e When inserting or taking out the pod to and from the support assembly DvRigPro Thank you for choosing The DvRigPro Take off all the packaging materials and put all the parts in front of you Check that you have all parts in the list Standard Package Rig Chassis w QR base and 2 grip handles Shoulder Brace w Balance Weight QR sliding Camera plate Support belt w Pod Holster Suspension Pod Low mode b...

Page 2: ...ooting Attach the Remote control unit Optional to the top of the right padded handle bar The DvRigPro Chassis is now ready The Active Suspension Pod The active Suspension pod is supplied and stored spring loaded this means that releasing the locks will release the springs the pod may take off like an arrow and hurt or damage you or your property Be Careful and Do Not Unlock until ready to be used ...

Page 3: ...mfortable Stand straight and lose Adjust the large back elevation knob 2 so that your shoulder will fit into its place in the rig s shoulder brace Move the shoulder brace back and forward until it fills comfortable Best position is when the chassis is Horizontal For best performance always apply forward pressure on the handlebars This will keep the Shoulder brace in the right position Release the ...

Page 4: ...ly SuperLube Along the two springs and inside the tubes Always slightly unlock all four rig s knobs for storage or transport Avoid storing in very hot and or very humid places Shooting Tips Do not lean forward or back for tilting Just release The Tilt Crane knob 1 then Tilt and or Crane to any desired position Adjust the Elevation knob 2 for adjusting the camera height to meet the desired objects ...

Reviews: