DVS SpycerBox, Hardware Manual

Page: 30 / 62

2-12
SpycerBox Hardware Guide
2.2.4 Slot Panel Connectors
The SpycerBox provides on its slot panel connector area several connec-
tion possibilities such as the network ports or ports to connect the sys-
tem to a SAN. The following figure shows an example configuration of
the slot panel connector area:
Figure 2-13: Example of a slot panel configuration
The above layout of the slot panel area is just an example. The one on
your system may differ from the figure above: The position of the indi-
4, 5 LAN
(1000 Mb)
Gigabit Ethernet (1000 Base-T) connection
ports to connect your system to a network.
6 keyboard PS/2 connector to connect a keyboard to your
system.
7 COM port RS-232 connector for the connection of serial
interface devices.
8 VGA DB-15 connector (female) to connect a moni-
tor.
If an extra graphic card is installed in
your system (see section “Slot Panel
Connectors” on page 2-12), this con-
nector will not be operational.
No. Item Explanation
Port 1
2 Gb 1 Gb
Port 2
2 Gb 1 Gb
Gigabit Ethernet graphic card Fibre Channel