DVS SpycerBox Ultra, Hardware Manual

Page: 31 / 72

2-13
Overview
2
1
3
4
5
I
A
2.2.4 Slot Panel Connectors
The SpycerBox Ultra provides on its slot panel connector area several
connection possibilities such as the network ports or ports to connect
the system to a SAN. The following figure shows an example configu-
ration of the slot panel connector area:
Figure 2-15: Example of a slot panel configuration
The above layout of the slot panel area is just an example. The one on
your system may differ from the figure above: The position of the indi-
vidual slot panels may vary and/or other panels may be installed, either
for internal reasons or on your request.
8 LAN Gigabit Ethernet (1000 Base-T) connection
ports to connect the system to a network
9 back surround Connector for rear surround speakers
10 side surround Connector for middle surround speakers
11 front Connector to output audio signals (line
out), e.g. for front speakers or headphones
12 mike Connector to input low-level audio signals
No. Item Explanation
Port 1
2 Gb 1 Gb
Port 2
2 Gb 1 Gb
graphic card
Gigabit Fibre
Channel Ethernet SAS