Operation
Starting the System
4-2
SpycerBox Ultra/Flex | Hardware Guide | Version 3.1
Rohde & Schwarz DVS GmbH
4.1 Starting the System
After a proper installation of the system (see chapter “Installation” on
page 3-1) you may start the R&S DVS system at any time.
To start the system perform the following:
1.
Press the power switch briefly to turn on the system.
The system will be started and the R&S DVS logo in the middle of the
faceplate lights up. As with any standard computer after initial booting,
the system begins to load the installed operating system.
When the operating system has finished its loading, you can begin to
work with the R&S DVS system right away.
During the start-up of the system several alarm beeps will be sounded.
This is part of a self-test and does not indicate an error or malfunction.
