Overview
Variants: SpycerBox Ultra and SpycerBox Flex
2-2
SpycerBox Ultra/Flex | Hardware Guide | Version 3.1
Rohde & Schwarz DVS GmbH
2.1 Variants: SpycerBox Ultra and SpycerBox Flex
The SpycerBox can be delivered in two different hardware variants de-
pending on, for example, the amount of the storage or the performance
that is required. The following variants are available:
SpycerBox Ultra using 3.5" hard disks (normally 24 pcs.) and pro-
viding a storage capacity of up to 96 TB.
SpycerBox Flex using 2.5" hard disks (normally 48 pcs.) for up to
57.6 TB of storage capacity.
Apart from the hard disk array where the hard disks are installed (see
section “Hard Disk Array” on page 2-7) the two variants are in most re-
spects identical. Whereever required the specialities of these variants
will be detailed in this document.
2.2 Overview of the Front
This section gives an overview of the front of the R&S DVS system. Af-
ter an overall overview of the front the DVD drive is described first, fol-
lowed by details about the HDD LEDs. After this the faceplate and the
hard disk array of the system as well as the operation items will be ex-
plained.
2.2.1 The Front of the System
This section provides an overview of the front of the system:
Furthermore, SSDs (Solid State Drives) are supported in various capac-
ities. Please contact the R&S DVS service department for further infor-
mation.
