DVS Pronto4K, Hardware Manual

Page: 31 / 74

2-13
Overview
2
1
3
I
4
5
A
2.2.4 Main Connector Panel
The main connector panel provides the standard in- and outputs of
Pronto4K to give you the full functionality of the system. It holds, for ex-
ample, the connectors for remote control and the digital video in- and
outputs (serial digital interface).
Figure 2-12: Main connector panel on rear
Pin-outs of most connectors can be found in section “Signal
In- and Outputs” on page A-9.
For the availability of connectors not present at the system’s
rear (blind panels) please contact DVS.
Item Description
RMT In DB-9 connector (female), serial RS-422 inter-
face for an input of slave control signals
RMT Out DB-9 connector (female), serial RS-422 inter-
face for an output of master control signals
An. Audio Out 6.3 mm (¼") unbalanced analog stereo head-
phone jack to monitor the audio output, i.e. the
analog audio output
Digital Audio
Ch. 1-8 DB-25 connector (female) for a balanced audio
signal in- and output of the digital audio
channels 1 to 8 (AES/EBU); XLR connectors
are available via a breakout cable