Heat Boost
HEAT BOOST overrides any existing pre-set MODE and temporarily turns the
Air-
Warmer on for the length of time selected. At the end of this time, the Air-
Warmer will revert to its previous settings in the Air-Warmer Mode menu.
HEAT BOOST can be selected for ½, 1, 1½ or 2 hour periods.
Note:
When HEAT BOOST is selected, the word “Boost”, together with the
selected duration, will be displayed on the Current Status screen.
Setting the Timer
Before setting any Timer programme, it is important to check and set the CLOCK correctly, as all Timer
settings rely on the day and time being correct.
1.
From Main Menu 3, select AIR WARM.
2.
Select SET TIMER.
3.
Select Programme 1 using the PROG button. Each time you enter any of the Timer functions it will
default to Prog 1 and the ON time.
4.
To select the ON day or days, repeatedly press the ‘DAY’ button to scroll through and select individual
days or groups of days that you wish to set the ON/OFF times for. Eleven individual days or combination
of days will appear in sequence along the top of the screen in the following order:
Mon / Tue / Wed / Thu / Fri / Sat / Sun, i.e. each individual day only
Mon Tue Wed Thu Fri i.e. all five weekdays grouped together
Sat Sun i.e. two weekend days only grouped together
Mon Tue Wed Thu Fri Sat i.e. six days grouped together
Mon Tue Wed Thu Fri Sat Sun i.e. all seven days of the week grouped together
5.
Once you have selected one of the above options, you may now select the time you would like the Air-
Warmer to switch ON by pressing the ‘HOUR’ and ‘MIN’ (minute) buttons. If you go past your desired
time, just keep pressing the ‘HOUR’ or ‘MIN’ buttons until the desired time re-appears.
6.
After selecting the desired ON day(s) and time, press the OFF button. The OFF time section will be
highlighted and is now ready to set the OFF time.
7.
Select the time you wish the Air-Warmer to switch OFF by again pressing the ‘HOUR’ and ‘MIN’ buttons
as in 5.above. If, after setting the OFF time you wish to amend the ON time, simply press the ON
button to highlight the ON time section and make the changes. Repeat for OFF time if you wish to
amend the new or any existing OFF time.
8.
Press and release the ‘PROG’ button again to save the settings for PROG 1. The timer will
automatically bring up PROG 2.
9.
If you wish to set ON/OFF times for another day or combination of days in PROG 2 repeat the steps
from 2 to 6 above. You can programme up to seven ON/OFF settings.
10.
When you have finished setting the ON/OFF times, press the ‘EXIT’ button to save all the timer settings
and return the display panel to the Current Status screen
Note
: If you wish to delete any preset Timer programmes, bring up the respective PROG by pushing the PROG
button and press the DAY, ON, OFF, HOUR and MIN buttons until - -:- - appears in the respective fields.
