37
/
84
SM-SG-2 Ev3/25062014
6.9 REPLACEMENT OF THE PUMP DRIVING BELT GOOD YEAR BX 17X960
-
Lift the mower up to the max. height of cut and tilt it to the side of the fuel tank!
-
The belt BX 17x960 is tensioned with the pump pulley. To tension the belt, disasemble the pump pulley
and remove the required number of spacers
Dismounting:
-
Remove left mowing blade, carrier cartridge and clutch cover (Fig. 62, 63)
-
6.7 Replacement of the clutch driving belt B 1160
-
Remove belt tensioning nuts and the pulley front disk (ATTENTION! There is a locking grub screw on
pulley side!)
-
Remove the belt BX 17x960 from the pump pulley
-
Measure the distance of the brake wheel discs of the clutch x ( Fig. 69) and make a note of it (approx. 28
mm)
-
Undo the adjustment nut 1 and locking nut 2
-
Remove bolt 3 and spring 4 together with nut 2 (Fig. 69, 71)
-
Replace the belt BX 17x960
Fig. 69
Fig. 70
Fig. 71
Belt BX 17x960 Good Year
Bolt 3
Summary of Contents for ILD02 SG
