background image

-1-

 

 

!

   WARNING – Product Safety

1.  Do not dismantle the product housing or modify the printed circuit board 

module as this may result in electrical shock or burn.

2.  Do not attempt to service this product yourself as opening or removing the 

product housing may expose you to dangerous voltages or other hazards. 
Refer all servicing to qualified service personnel. 

3.  Keep this product away from liquids.  Spills into the product housing may result 

in fire, electrical shock, or equipment damage.  If liquid spills into the housing, 
unplug the product immediately.  Have the product checked by a qualified 
service engineer before using it again.

4.  Place the product in an even and stable location.  If the product falls or is 

dropped, it may cause an injury and/or malfunction.

5.  Avoid exposing the product to extreme temperatures or to high humidity levels 

as this may result in damage to the product.

6.  Only use the supplied External AC Power Adapter.  The use of other power 

adapters may cause this product to fail or may cause a fire.

7.  Do not twist or exert excessive force on the ends of the optical cable as this 

can cause it to malfunction.  Take precaution to ensure that the fiber optic 
cable is not forced to bend tighter than its minimum bend radius. 

Product Liability

Every effort has been made to ensure that this product is free of defects.  
DVIGear cannot be held liable for the use of this product or for any direct or 
indirect consequential damages arising from its use.  It is the responsibility of 
the users of this product to check that it is suitable for their requirements and 
that it is installed correctly.

All rights are reserved.  No parts of this manual may be reproduced or 
transmitted by any form or means electronic or mechanical, including 
photocopying, recording or by any information storage or retrieval system 
without the written consent of DVIGear.

DVIGear reserves the right to revise any of its hardware and software following 
its policy to modify and/or improve its products where necessary or desirable.  
This statement does not affect the legal rights of the user in any way.  All 
third-party trademarks and copyrights are recognized.  The DVIGear logo is a 
registered trademark of DVIGear, Inc.  All other trademarks are the property of 
their respective holders.

Summary of Contents for DVI-7335











Reviews: