-5-
The DVI-5312b and DVI-5314b splitters are functionally identical with the
exception of the number of outputs. Both units have a single DVI-D input and a
+5 VDC power input jack. These connections, as well as the output connectors,
are located on the rear panel.
4 .1 Input / Output Connections
Connect a DVI-D or HDMI compliant input signal from a suitable source device
to the DVI Input Port. Next connect the output devices (typically displays) to the
DVI Output Ports. Make certain that all cables are securely plugged in on both
ends. Always use high quality cables, as short a length as possible, to ensure
the best results. Do not exceed the recommended cable lengths indicated in
this User Guide.
4 .2 Connecting the Power
This product is shipped with an External AC Power Adapter that converts 100-240
VAC at 50/60Hz to +5 VDC with 2.0A output current. Connect the output cable
from the AC Power Adapter to the locking receptacle on the rear panel. Take care
to insert, then twist the connector a quarter turn in the clockwise direction. There
is no power switch on these units. The units will turn ON as soon as the supplied
AC Power Adapter is connected to a live AC power receptacle.
5 .0 OPERATING THE UNIT
To use the DVI-5312b and DVI-5314b splitters, first connect a DVI-D or a HDMI-
DVI cable from the DVI or HDMI source device to the input of the splitter. Next,
connect the outputs of the splitter to their destination devices (typically displays or
projectors). Take care to ensure the cable quality and lengths are consistent with
the recommendations provided herein.
Once the input and output cables and External AC Power Adapter are connected,
plug the power adapter into a live AC power receptacle and the splitter will begin
to function. A Power LED on the front of the unit will confirm power is present.
Other than connecting cables and applying power, there are no other set-up steps
required with the exception of setting the EDID selector switch on the front panel.
Note:
Proper operation of this product depends on the use of high quality cables.
DVIGear’s Super High Resolution (SHR™) DVI or HDMI cables provide low loss, low jitter,
high bandwidth signal handling and are the recommended cables for use with this product.
