4
DVI-26xxx-AOC-QSG-02 / March.2018
© 2017, 2018 DVIGear, Inc.
All Rights Reserved
DVIGear
1059 Triad Court, Suite 8
Marietta, GA 30062 USA
Toll Free:
888.463.9927
Tel: +1.770.421.6699
Fax: +1.770.234.4207
[email protected]
www.dvigear.com
Cable Mating Diagram
Detaching and attaching the DisplayPort Docking Connector to the Cable End
(4)
3
2
1
1.)
Hold the DisplayPort Connector with the Latch Release Button facing upwards.
2.)
Insert the correct end of the cable into the appropriate DisplayPort Docking Connector
until it clicks fi rmly in place. The HyperLink Logo should be facing upwards. Ensure that
the TX cable end is seated in the Source Docking Connector (p.n. DVI-26000-TX). The
RX cable end should be seated in the Display Docking Connector (p.n. DVI-26000-RX).
3.)
Install the Locking Pin by inserting it fi rmly through the docking connector and the cable
connector as shown above. Take care to ensure that it is fl ush when seated.
Note 4: WARNING:
Always use the supplied DisplayPort Docking Connectors. Never plug the undocked cable
directly into ANY other product as this could damage it and the cable.
