-6-
5 .0 OPERATING THE UNIT
Source Device
(e.g. PC or Mac)
Display Device
(e.g. Projector)
DVI-23xxx-FO
Fiber Optic Cable up to 100m
AC Power
Adapter (optional)
Transmitter Module
(Computer)
Receiver Module
(Monitor)
5 .1 Interconnections
1. Connect the transmitter module (labeled “Computer”) to the source device
(e.g. PC, Blu-ray, etc.).
2. Connect the receiver module (labeled “Monitor”) to the display or projector.
3. In many applications, the DVI-23xxx-FO cable can receive power from the
source device via the 5V power pin on the DVI or HDMI connector. In the
event that the source device cannot provide adequate power, the cable
may also be powered using an optional External AC Power Adapter. In
this case, connect an AC Power Adapter to the power input jack on the
transmitter module and then to a live AC power source.
4. Turn ON the Display, and then turn ON switchers and other distribution
equipment (if used). Finally, turn ON the source. Test the system to ensure
proper performance.
