24
4 TViX HD Setup Menu
4.1 Audio/Video
Setting
This section indicates the Audio/Video settings.
Setup password protection is available. You can set password to enter into setup menu. (on MISC menu
inside SETUP) .This will block children changing setup accidentally.
The password is 1111
*
Audio
: You can set the mode of audio output by each audio codec used.
- If you set Audio to Digital, you can set DTS and WMA to digital or analog.
- Please set this according to the audio format your receiver supports.
*
Analog :
Select this when you connect the audio with a stereo RCA cable (the RED and WHITE cable)
You can set the mode of audio output by each audio codec used. If you set Audio to Digital, you can set DTS
and WMA to digital or analog. Please set this according to the audio format your receiver supports.
*
Digital :
Select this when you connect the audio with an optical or coaxial cable for digital audio connection
to the Decoder/Amplifier. There will be no analog audio out from the analog audio port of the TViX HD.
*
TV Standard
: The default video setting of the TViX HD is COMPOSITE (NTSC/S-VIDEO or PAL C/S-
VIDEO). This is the most general setting and works with almost all TVs.
*
NTSC/PAL Auto Switch
: is used when the video out is changed according to the NTSC or PAL format.
*
TV Type
: 4:3 Letter Box / 4:3 Pan & Scan for ordinary TVs / 16:9 for Wide TVs like HDTV or Plasma TV.
If the ratio of the TV is 4:3, select the 4:3 letter box or 4:3 Pan & Scan. If the ratio is 16:9, select 16:9.
* The 4:3 Letter box can show the original ratio of the multimedia file in 16:9.
Audio : Digital
Analog(PCM)
Digital
DTS Audio : Digital
WMA Audio : Analog(PCM)
AAC Audio: Analog(PCM)
TV Standard : NTSC
NTSC
PAL
NTSC/PAL Auto Switch Off
TV Type : 4:3 letter Box
4:3 letter Box
4:3 Pan-Scan
16:9
Video Port : Composie/S-video
Composie/S-video
Component/DVI
Video Out Color : YPbPr
YPbPr
RGB
Video Out Mode : 480i/576i
480i/576i
480P/576P
720P
1080i
Apply Now
