4
DVDO-Xtend-RX100_V1.0.0
DVDO-Xtend-RX100 HDBaseT 2.0 Receiver with USB and Audio De-embedding User Manual
DVDO
Introduction
This product is an HDBT 2.0 receiver that designed to work with an HDBT wall
plate transmitter, reliably extending UHD video, multi-channel audio, USB 2.0,
RS232 signal and power up to 100m/330ft over a single Cat X cable.
It supports USB 2.0 pass-through, providing a solution for users who need to
remote control PC sources with keyboard, mouse, interactive display or USB
streaming devices over distance. RS232 port allows bi-directional RS232 serial
communication. With PSE module built-in, it can carry power to the transmitter
with PD module via a single power supply.
Features
Simple, ultra-slim and cost-effective HDBT 2.0 receiver
HDBT input and HDMI output support resolutions up to 4K@60Hz (YUV
4:2:0) and HDCP 2.2
HDBT transmission up to 100m/330ft at 1080P@60Hz and 4K@60Hz
(YUV 4:2:0) via a Cat 6/6a/7 cable
HDBT transmission up to 100m/330ft at 1080P@60Hz and up to 90m/295ft
at 4K@60Hz (YUV 4:2:0) via a Cat 5e cable
Supports analog audio pass-through from transmitter to receiver
Supports analog audio de-embedding for HDMI output
High-speed USB 2.0 pass-through over HDBT
Provides four USB Device ports for remote KVM (Keyboard, Video, Mouse)
control
Supports bi-directional RS232 serial communication to control the
RS232-enabled device when works with a normal HDBT transmitter
Supports bi-directional RS232 serial communication to control a wall plate
transmitter when works with this transmitter
