Loosely install the feet to the rack using
the provided M8x20 hardware and a 13mm
socket. Be sure to use the
shorter
M8 hard-
ware, as the longer M8 hardware will be
needed later. The open section of the feet
will face towards the inside of the rack.
NOTE: The feet are designed and labeled for
specific positions. For example, “
DF
” refers to
“
Driver Front
”.
Peel paper from the foam and install to the
corresponding brackets. When applying
foam to clamps, the foam will bend and
wrap inside the mount.
STEP 4
STEP 3
INSTALLATION
MANUAL
NEED HELP?
855-680-9595
