INSTALLATION
MANUAL
855-680-9595
NEED HELP?
STEP
10
STEP
12
To remove the wire harness, using a flat
head screwdriver or pin puller, remove
all the retaining clips securing the
harness to the bumper.
Lastly, gently squeeze the same two
tabs on the sensor bezel and push the
backside of the sensor to remove the
bezel. Continue the same steps on the
remaining sensors.
STEP
11
To remove the sensors, spread the two
tabs on the sensor bezel and gently
pull up on the sensor. Make sure that
the rubber ring around the sensor
head remains on the sensor.
