DISEL
FIRE PANEL
INSTALLATION, MAINTENANCE and OPERATION GUIDE
3
On The Control Panel The Speclal Securlty Equlpment
And Recommendations
May result in electrical shock or death.
In the wrong intervention to the control panel
may cause damage to the panel.
●
Control panel electronic card in order to protect from
extemal factors is made of plexiglass with a specially
designed insulation protection is available.
●
This protection panels and electronic card intervene
must not removed by unauthorized persons.
Efficient Use of Energy Saving Information
●
Pumps and motors energy-consuming products.
Personal causes and is extremely important for the
national economy.
●
Control panel suitable motor and pumps be used.
●
All electrical connections to the instructions by
providing appropriate and accurate; Be provided to
prevent any loss and leakage of electricity.
Usage Life
The product is determined by the Ministry of Industry
and declared usage life (time required to carry out the
functions of the appliance spare parts) 10 years.
1. TRANSPORT / STORAGE / MONTAGE
1.1 Transfer
●
Handle carefully control panels.
●
Appropriate size of the control panels are shipped in
cardboard boxes.
●
Do not remove the cardboard box inside the control
panels during transport.
1.2 Transport
●
Measure damage to the panel, and bad weather
conditions during transport should be taken to avoid
exposure.
●
Received by the panel in order to comply with the
model and should be checked for any damage during
transport.
●
If the clipboard contains a damaged or missing
damage assessment report should be given written
information to the shipping company our company.
1.3 Storage
●
Control panels of instead of immediately montage if not ;
●
Do not store in damp environments.
●
Do not put weight on the control panels.
●
Protect from direct sunlight at the control panels.
●
Keep out of the control panels watertight.
1.4 Montage
●
When performing mounting, follow the
Instructions otherwise It may be damaged
panels.
●
Montage are not observed instructions
during the that as a result of electric shock,
serious injury or death may result.
●
While mounting nuts at the rear of the control panel
should be mounted with suitable screws.
●
Do not mount the back of the board is drilled
with another screw. This may cause damage to the
electronic card.
●
Control panel electrical connection must be carried
out only by qualified personnel necessary safety
precautions.
2. OPERATING
●
Control panel electrical connections should be
checked.
●
The control panel should be checked that the cover is
closed.
●
There is power cut, the phases should be checked to
be complete.
●
Control panel settings to be used should be based
on pump or motor. Introduction to the settings
menu, you will find that you are using the appropriate
settings to the clipboard
3. MAINTENANCE
3.1 Monthly Maintenance
●
Disconnect electrical power before
maintenance operations.
●
Control panel electrical connections should be
checked relaxation.
The grounding line of the control
panel should be checked.
●
Electric cables, abrasion, puncture should be
examined for color change and warming.
