Assembly Instructions
STEP 1
.
Open the box and position the two play surfaces face down on the cardboard.
Note: Make sure that the two play surfaces are positioned, with the ends of the table possessing the
pre-assembled net support brackets represented in Fig 2.1, facing each other.
STEP 2. (Fig.2.1)
Attach inner legs (P14) using Half Round (P12) and Screw (H7).
STEP 3. (Fig.3.1)
Attach two Plastic Wheels (P1) using (H1) and (H2) to both Inner legs (P14) as
pictured below. Fig.3.1 represents both inner legs.
15
Note:
If you notice resistance in
putting the legs up, carefully
work the legs back-and-forth
until the movement in
smooth.
EN
