7
Reversing The Door Swing For
DI50
-O
Tools needed:
Flathead screwdriver, Phillips screwdriver
NOTE: Before you begin, unplug the ice maker or disconnect power.
To Remove Door From Hinges
1.
Remove the top hinge cover.
2.
Using a Phillips screwdriver, remove the screws, remove the top hinge mat and top hinge. Keep the parts
together and set them aside.
3.
Lift the door off of the bottom hinge and set the door aside.
To Replace Door On Hinges
1.
Using a flathead screwdriver, remove the plug buttons from the screw holes opposite the door hinges, top and
bottom. Set aside.
2.
Remove the front louver. Set aside.
3.
Remove the bottom hinge and place it on the opposite side at the bottom of the door.
4.
Position the door on the bottom hinge.
5.
Align the door on the bottom hinge and replace the top hinge and top hinge mat.
6.
Replace top hinge cover.
7.
Push the plug buttons into the original screw holes.
See Figure below:
Top hinge cover
Cabinet
Top hinge mat
Top hinge
Top hinge
Door
Bottom hinge
Bottom hinge
DI50V
black top hinge
no cover or
mat.