Lock Washer and
¼" x 4"
Connector Bolt
Lock Washer and
¼" x 3"
Connector Bolt
Step 3
Step 4
Attach crib spring (H) to metal insert with four ¼" x 1" connector bolts and lock washers using Allen wrench
provided. Small springs should be at top to support crib mattress. See figure 4. There are three metal inserts
for height adjustment of crib spring.
Note:
Crib spring should be lowered as child grows to discourage
child from trying to climb out.
DO NOT fasten the bolts all the way until you have completed
step 4
Attach small posts (D) to ends of front panel (C) with two ¼" x 3" connector bolts and
lock washers and two ¼" x 2½" as shown in figure 2, making sure to center panel on
posts. Turn connector bolts snug. The word “inside,” located on bottom rails, should be
on the inside of the crib.
Now tighten crib spring bolt.
Short Post (D)
Short Post (G)
I
nstructIons
for
A
ssemblIng
c
AymAn
c
rIb
I
nstructIons
for
A
ssemblIng
c
AymAn
c
rIb
CAUTION:
ANY MATTRESS USED IN THIS CRIB
MUST BE AT LEAST 27¼" BY 51
/ "WITH
A THICKNESS NOT EXCEEDING 6 INCHES.
5
8
Your crib is now ready for bedding.
(G)
Short Post
(D)
Short Post
Pivot Arms
Metal Inserts
(H)
Crib Spring
¼" x 1"
Connector Bolt
(C)
Front Panel
Tools Needed:
Tools Needed:
(2) ¼" x 3" Connector Bolt
(2) ¼" x 4" Connector Bolt
Allen Wrench
(4) Lock Washer
(4)
¼
" x 1"
Connector Bolt
(4) Split
Lock
Washer
Allen Wrench
