ASSEMBLY INSTRUCTIONS
4100060 CABINET COALS LOW
Page 1 of 2
(Installing Anti-Tip kit)
PARTS INCLUDED (per set)
(A) Wall Metal Cleat (1pc)
(B) Cabinet Metal Cleat (1pc)
C
(D) Cable Bolts (2set)
(E) Wall Anchors (2 pc)
(F) Anchor Screws (4 pc)
Tools Needed:
A. Hammer
B. Drill Machine
C. Screwdriver
D. Pencil
ASSEMBLY INSTRUCTIONS
Step-1
A. Place the Cabinet Metal Cleat (B) at the back of the cabinet as shown and screw the anchor Screw (F) through the Cabinet Metal Cleat
(B) into the cabinet.
B. Determine the final placement of cabinet.
C. Place the metal wall cleat (A) on the desired location, and mark the hole openings on the wall with a pencil.
Be sure to confirm precise levelness for accurate screwing.
D. Drill small pilot holes into the wall at the marked locations, and insert wall anchors (E) until flush with the wall.
Step-2
Place the Metal Wall Cleat (A) over the Wall Anchors and screw Wall Screws (F)
through the Metal Wall Cleat and directly into the Wall Anchors. Repeat Step-1& Step -2
for second set of Anti-tip too.
Step-3
A. Insert The Anchor Cable ( ) through The Cabinet Metal Cleat (B) as shown and screw the Cable Bolts (D)
B. Insert The Anchor Cable ( ) through the Wall Metal Cleat (A) as shown and screw the Cable Bolts (D)
C. Repeat for the second anti-tip too.
Be sure the cable bolts are fastened securely.
D. Your Anti-tip kit is installed.
Step — D
Step -A
Step - B & C
