3
Setup
How To Use
1. Unpack and Check Box Contents:
Remove entire contents of box. Check each item against the Parts List. (pg. 4)
Notify Dustless Technologies
®
immediately if any parts are damaged or missing.
2. Install Rod and Float:
Place upside down on a flat surface.
Operation:
Place vacuum on drum. Push hose onto the intake port. Plug in vacuum.
The on/off switch is located on the shroud below the cap.
Do not operate vacuum without float or filter in place
When the drum is full of liquid, the automatic shut-off mechanism will shut off air flow. When this happens, the motor sound will become
noticeably higher in pitch. Turn cleaner off and empty or replace drum to continue use.
Storage
Disconnect from electrical outlet. Remove from drum. Store in a dry location indoors. Wrap the cord carefully around the vacuum to avoid
accidental damage.
3. Wrap Filter around Filter Cage.
Tighten with wrench
Thick foam down
4. Place the Filter Cage, Filter and Wing Nut over the Float.
Tighten Wing Nut
Attach velcro ends
