background image

DC 5800c PTFE 5.5 kW - 8

Part No 9475-B

2011-08-12

Safety Considerations

Read all instructions before attempting to operate this 
machine and save these instructions.

Warning! 

When using electric machines, basic safety 

precautions should always be followed to reduce the risk 
of fi re, electric shock and personal injury, including the 
following:

1.

 

Important!

 

No hot particles nor ignition sources are allowed to be 
sucked into the unit. Th

  e machine should not be used 

for explosives, unstable or pyrophoric particles or dust 
of minimum ignition energy (MIE) <1mJ.

 

– WARNING Operators shall be adequately instruc-
ted on the use of these machines.
– WARNING Th

  is machine is for dry use only.

– CAUTION Th

  is machine is for indoor use only.

– CAUTION Th

  is machine shall be stored indoors 

only.

2.  Work area environment

Don´t expose the machine for rain. Don´t use it in 
damp or wet locations or in presence of fl ammable 
liquids or gases.

3. Overload

Never let the machine operate fully throttled. Always 
follow the regulations pertinent to the 

 

material you are working with ie asbestos. Don´t use 
the machine for purposes that it isn´t

 intended 

for.

4. Body 

injuries

Never let the suction come in contact with parts 
of the body. Th

  e strong suction eff ect can hurt the 

blood-vessels in the skin. Do not repair the electric 
components yourself. Th

  e machine should be ser-

viced by qualifi ed personnel only. Faults may cause 
injury. See also below under warnings.

5.  Don´t abuse cord

Never pull the machine by the cord. Keep the cord 
from heat and sharp edges. Check the electric cable 
regularly for damage.

6. Important 

measure

With cleaning and maintenance on the machine, the 
power cable should be disconnected from the supply.

7.  Maintain the machine with care
 

Keep machine clean and check  that the hose is 
undamaged and that all gaskets are tight. Follow 
instructions. Keep handles dry and free from oil and 
grease.

8.  Checking for damage

Before futher use of the machine it should be ca-
refully checked that the machine is un damaged. If 
there are any damaged parts these should be repaired 
by a Dustcontrol authorized service center.

 

If the supply cord is damaged, it must be replaced 
by the manufacturer, its service agent or similarly 
qualifi ed persons in order to avoid a hazard.

9. Warning

Use only accessories and replacable parts which are 
available in the Dustcontrol catalogue. 

 

Th

  is appliance is not intended for use by persons 

(including children) with reduced physical, sensory 
or mental capabilities, or lack of experience and 
knowledge, unless they have been given supervision 
or instruction concerning use of the appliance by a 
person responsible for their safety. Children should 
be supervised to ensure that they do not play with 
the appliance.

 

Th

  is machine is intended for commercial use 

only, for example in hotels, schools, hospitals, 
factories,shops, offi

  ces and rental businesses.

Summary of Contents for DC 5800c
















Reviews: