Dustcontrol DC 2900a Specifications & Instructions Download Page 7

DC 2900, 17

Part No 94164-A

Problem

Fault

Solution

Motor will not start. 

Machine not connected. 

Make sure connection. 

The motor stops directly  

Incorrect fuse. 

Change to correct circuit.

after starting. 

Fan runs but no suction.  

Hose not connected. 

Connect the hose.  

Hose plugged.   

Find and remove block.

DC 2900c 

No plastic sack on the 

Mount the correct sack.

cyclone.

DC 2900a 

The container is not 

fi

 rmly 

Secure the container.

attached to the bottom of 
the cyclone.

Fan runs but poor suction.   

Hole in the hose.  

Change or repair hose.  

Plugged

fi

 lter. 

Clean or change 

fi

 lter.  

Hose too long or too small. 

Change the hose.

Hose is kinked.  

Check and free.

Machine top is mounted 

Adjust the mounting. 

incorrectly.
Dust is packed in the  

Take off the top and clean 

cyclone.

out.

Machine blows dust.  

Filter is perforated or has   

Check the 

fi

 lters and change

come loose. 

if necessary.

Abnormal sound  from 

Order service.

machine. 

TROUBLE SHOOTING

Warranty

The warranty period for this machine is two years 
and covers manufacturers faults. The warranty is 
valid under the condition that the machine is used 
under normal conditions on the task for which it was 
designed and is maintained properly. 

Normal wear is not covered by this warranty. Service 
performed by other than Dustcontrol or its authorized 
agent voids automatically the warranty. No other 
warranty express or implied is applicable.

Description

Part 

no

Plastic sack, standard 

42702

Fine 

fi

 lter, cellulosa with 

integrated 

fi

 lter cover 

42029

Other accessories, see Dustcontrol catalogue.

Accessories

Description

Part 

no

Fine 

fi

 lter, polyester with 

integrated 

fi

 lter cover 

42028

Micro

fi

 lter 

42027

EN

G

LI

S

H

Summary of Contents for DC 2900a









Reviews: