Habitat 100V
4 How to use
2021 © Durst Phototechnik AG, User Manual, Version 01/2021 REV1.0
13
4.4 Daisy chain operation
It is possible to run up to four Durst Habitat devices in daisy chain mode.
Do not run more than four devices in daisy chain mode.
Only use the included daisy chain cables to connect devices.
Do not use more than one daisy chain cable to connect two single devices.
Fig. 5: Daisy chain operation
1 main device
2 additional device
3 daisy chain cable
4 output socket
5 input socket
6 power cord
7 switch air purifier ON / OFF
1. Position main device and desired number of additional devices.
2. Connect first additional device to main device.
– Plug daisy chain cable into output socket of main device.
– Plug other end of daisy chain cable into input socket of first additional device.
3. Connect more additional devices.
– Plug daisy chain cable into output socket of already connected additional device.
– Plug other end of daisy chain cable into input socket of new additional device.
4. Connect power cord to input socket of main device.
5. Switch on all connected devices using the core-unit switch on each device.
1
2
2
3
3
3
6
4
7
5
2
Summary of Contents for Habitat 100V
Page 1: ...Habitat 100V User Manual Version 01 2021 REV1 0 IV812EN...
Page 2: ......
Page 23: ......
