Habitat 100H
5 Maintenance and Troubleshooting
2020 © Durst Phototechnik AG, User Manual, Version 12/2020 REV1.6
19
5
Maintenance and Troubleshooting
5.1 Status and error messages
LED indicator
status / error
measure
LED off: device currently
switched off.
-
Device switched on,
currently in warm-up phase.
-
White LED: Device switched
on.
-
Left and right temperature
sensors defective.
Contact Durst customer
service.
Red LED: maintenance
cover not closed / loose top-
unit screws.
Close maintenance cover
and / or tighten top-unit
screws.
Disconnect power
cord before accessing
top-unit screws.
UV-C lamps of left module
defective.
Replace both UV-C lamps
of left module.
UV-C lamps of right module
defective.
Replace both UV-C lamps
of right module.
UV-C lamps of both
modules defective.
Replace all lamps of both
modules.
Left fan defective.
Contact Durst customer
service.
Right fan defective.
Contact Durst customer
service.
Both fans defective.
Contact Durst customer
service.
UV-lamps of left module and
left fan defective.
Contact Durst customer
service.
UV-lamps of right module
and right fan defective.
Contact Durst customer
service.
UV-C lamps of both
modules and both fans
defective.
Contact Durst customer
service.
backlight LED
Loose top-unit screws.
Tighten top-unit screws.
Disconnect power
cord before accessing
top-unit screws.
* 3 seconds
Tab. 3: Status and error messages overview
Summary of Contents for Habitat 100H
Page 1: ...Habitat 100H User Manual Version 12 2020 REV1 6 IV813EN...
Page 2: ......
