Durr EcoGun, Operation Manual

Page: 7 / 24

+ additional qualification high tension tech-
nology
In addition to the knowledge of the various spe-
cialist fields, the mechanic has knowledge of the
following specialist fields
Painting process
High voltage engineering for electrostatic
coating
Dürr Systems offers special product training for
Ä “Hotline and Contact”.
2.6 Personal protective equipment
When working in explosive areas, the protective
clothing, including gloves, must meet the require-
ments of DIN EN 1149-5. Footwear must meet the
requirements of EN ISO 20344 and EN IEC
61340-4-3. The volume resistivity must not exceed
100M Ω .
Wear the specified personal protective equipment
when working. Provide the following personal pro-
tective equipment:
Anti-Static Safety Boots
Protect feet from crushing, falling items
and slipping on slippery ground.
Moreover, anti-static safety boots reduce
electrostatic charge by discharging the
electrostatic charges. Safety boots must
comply with the requirements of
EN 61340-5-1. The measured volume
resistivity must not exceed 100M Ω .
Eye protection
Protects eyes from dust, paint drops and
particles.
Protective gloves
Protect the hands from:
mechanical forces
Thermal forces
Chemical effects
Protective workwear
Tight fitting workwear with low tear
strength, tight sleeves and no hanging
parts.
Respirator mask
Protects from hazardous gases, vapors,
dust and similar materials and media.
3 Transport, scope of supply and
storage
3.1 Transport
Requirements:
Hoses are cleaned Ä 5.3 “Cleaning”.
Hoses are disassembled Ä 7.3 “Disassembly”.
1. Hose ends worn out.
2. Roll up hoses for transporting. Respect the
bend radius Ä 8.1 “Dimensions”.
3.2 Scope of delivery
Convoluted hose
Preassembled support bracket
Material hose.
Compressed air hoses
Petroleum jelly 40 g
Inspect delivery on receipt for completeness
and integrity.
Report defects immediately.
Ä “Hotline and
Contact”
Complete parts list in the electronic system docu-
mentation Ä “Applicable documents”.
3.3 Unpacking
DANGER!
Danger of explosion from electrostatic
charges on plastic film and foils
The foil can discharge at the time of unpacking.
Discharge can cause explosion in explosive
areas. Serious injury and death could be the con-
sequence.
– Unpack product outside Ex zones.
1. Unpack components.
2. Dispose of packing material.
3. Remove Velcro tapes on the rolled up convo-
luted hoses.
ð Do not throw away. Velcro tapes are still
needed.
Transport, scope of supply and storage
03/2019 Atomizer Connection EcoGun - MRS00004EN 7/24