10 Operation
10.1 Switch on the unit.
❯
Switch on the unit at the main power switch.
10.2 Device information
Use the menus
Unit information > Unit data
and
Unit information > Unit usage data
to call up
information including:
– IP address
– Tank pressure
– Compressed air humidity
– Serial number
– Firmware version
10.3 Configuring the units
Use the
Parameters
menu to configure settings
including:
– Compressor pressure range
– Suction unit lag time
Use the
System settings
menu to configure set-
tings including:
– IP address
– Language
10.4 Amalgam separator
❯
Tap
The fill level of the amalgam collecting con-
tainer and the pressure in the pressure tank are
displayed.
❯
Tap
The humidity and the temperature of the elec-
tronics are displayed.
Usage
A949100052L02 2104V003
23
EN
