6
Tools Required
Two people required. We recommend that a technically competent installer should
undertake this installation.
Be sure you have all included parts and tools required before beginning installation and that
you have plenty of space for assembly.
If you have ordered this shower enclosure with one of our shower trays,
please note
that
tiling should be done before the shower tray is installed. This is so that the shower tray can
be pushed up against the tiles and sealed with silicone.
PRE-INSTALLATION AND TECHNICAL REQUIREMENTS
•
All dimensions are shown in millimetres, except where otherwise indicated.
•
Ensure that the enclosure set is fitted to a level floor and vertical wall surface.
•
This instruction manual is applicable for both pre-tiled wall and plain walls.
•
The wall fixings included with this product are suitable for solid walls only. Plasterboard
or stud walls may require specialist fixings (not supplied).
•
Due to the possibility of residual spray, the area around the outside of the shower tray
should be tiled, or made otherwise water resistant.
IMPORTANT SAFETY NOTES
•
Under no circumstances should you attempt to drill through the glass, damage or injury
may occur
•
Please handle all glass with care, avoiding knocks and shock loading to all sides and
edges. Safety glass cannot be reworked.
•
Care should be taken when drilling into walls to avoid hidden pipes or electrical cables.
