Duronic FN30, Manual

Page: 8 / 42

8
1.
How to Use the FN30
How to Set Up Your Fan
Unfasten the connecting screw
(part 15)
from the support tube
(12)
and
insert the support tube
(12)
into the base
(14)
.
2. Tighten the connecting screw
(15) into
the bottom of the base to secure the
support tube
(12) in place
.
3. Unscrew
the blade fastener (4)
and
cover fastener (
2
)
from the
fan
motor head.
4. Separate the back cover
(1)
from the blade
(3)
by unfastening the screw.
5. Attach the back cover (1)
to the
fan
motor head and fasten in place with
the cover
fastener (2)
.
6. Attach the blade
(3)
to the output shaft
(7)
and fasten in place with
the blade fastener (4).
7. Attach the front cover
(5)
onto the back cover
(1)
and secure it in place using
the plastic ring
(6)
and tighten it in place
1.
with the screw.
Adjustment of the wind direction
The angle of the fan head is adjustable upwards or downwards by slightly lifting
or pressing the
mesh
cover.
2. Adjustment of the rotation
/oscillation
3.
Pressing the oscillation lock on the top of the motor head will activate the rotation function.
Pull the button up again to stock the fan head oscillating.
Adjustment of the wind speed
This
fan has 3 speed settings which can be selected by p r essing the numbe r ed buttons on
the cont r ol panel. C hoose f r om speed 1 , 2 and 3 .
8. Lastly, place the assembled fan head onto the extension tube (10) and fix in place
using the tightening screw on the back.