DUROMAX DuroStar DS1050, User Manual

Page: 10 / 50

QUICK START GUIDE
Add gasoline mix
The fuel cap is located on top of the fuel tank. Fill the tank
with fresh unleaded gasoline 87 octane or higher mixed
50:1 with 2-Stroke Oil. The tank is full when you see fuel in
the bottom of the fuel filter cup.
1.
Turn gas valve on
The gas valve is located above the recoil start on the
bottom of the fuel tank. Rotate the valve clockwise to the
vertical position to turn on the gas supply.
2.
10
Close choke
The choke lever is located above the air filter to the left
of the recoil start. Slide the lever to the right to cut the air
supply and allow more gas into the engine to start.
3.
Pull recoil start
Pull the recoil start handle quickly the complete length of the
rope and then let it retract slowly. The unit will generally start
within 3 pulls. CAUTION: DO NOT let go of the handle while
the rope is extended this may cause damage to yourself or
your machine.
5.
Flip engine switch to ON
The engine switch is located on the left side of the front
power panel. Flip the switch to on.
4.