10
SPECIFICATIONS
Model Number
Unit
RZ4012
Voltage
V d.c.
40
Drive/Anvil
in.
3/8” / 1/2”
Max. Tightening Torque
Nm
20~60
No Load Speed
rpm
0~6000
Capacity (Nominal bolt size)
mm
M10~M12
Tool Weight(
with battery 2.0Ah
)
kg
2.25
Charger Model Number
DC40UN26-C35
Input
100-240 V a.c., 50~60 Hz
Output
40 V d.c.
Output Amps
3.5A
Input Power
185W
Battery Pack Model Number
B4029LA
Type
Li-ion
Capacity
2.0Ah
ASSEMBLY
INSTALLING OR REMOVING BATTERY PACK
TO REMOVE BATTERY PACK: Depress the battery pack release button (8) and pull
the battery pack (9) out of tool.
TO INSTALL BATTERY PACK: Push the battery pack (9) onto tool until it locks in
place.
INSTALLING SOCKETS
Always follow the procedure below to install a socket.
1.
Insert a socket into the anvil (1).
2.
Make sure the bit is fixed in the anvil while clicking on the ball of the anvil.
REMOVING SOCKETS
Always follow the procedure below to remove a socket.
Always set switch (5) to off position when installing and
removing socket.
CAUTION
