-10-
Input Power
≦
75W /
≦
190W
Battery Pack Model Number
B6029LA
Type
Li-ion
Capacity
2.0Ah
VARIABLE SPEED SWITCH
The variable speed switch provides safety feature to the user for screw driving.
To turn the tool on, squeeze the trigger switch. To turn the tool off, release the trigger
switch (see Fig. 1A).
Your tool is equipped with a brake. The chuck will stop as soon as the trigger switch is
fully released. The variable speed switch enables you to select the best speed for a
particular application. The farther you squeeze the trigger, the faster the tool will
operate.
Use lower speeds for starting holes without a center punch, drilling metals or plastic,
driving screws and drilling ceramics, or in any application requiring high torque.
Higher speeds are better drilling in wood, wood compositions and for using abrasive
and polishing accessories. For maximum tool life, use variable speed only for starting
holes or fasteners.
NOTE:
Continuous use in variable speed range is not recommended. It may damage
the switch and should be avoided.
Fig. 1
FORWARD / REVERSE CONTROL BUTTON
A forward/reverse control button determines the direction of the tool and also serves as
a lock off button (see Fig. 2B). To select forward rotation, RELEASE THE
VARIABLE SPEED SWITCH, and depress the forward/reverse control button,
towards the left hand side of the tool. To select reverse, depress the forward/reverse
control button, towards the right hand side of the tool. The center position of the
control button locks the tool in the OFF position. When changing the position of the
control button, make sure the trigger is fully released.
A
