Dürkopp Adler 650-16, Operating Instructions Manual

Page: 42 / 150

Control with the OP3000 control panel
40 Operating Instructions 650-16 - 02.0 - 08/2016
5.4 Manual mode
Fig. 19: Manual mode
The following table shows the individual symbols (parameters) in
the display and the functions of the keys on the control panel.
When a parameter is selected, its color on the display changes.
When a parameter is changed, its new value is loaded immedia-
tely.
Symbol Meaning
(depending on the assignment)
Quick programming
• Press the upper softkey
Quick access function (softkey menu)
• Press the lower softkey,

p. 42 .
Program number
Value range: 000 to 999
Program 000 indicates that the control is in
Manual mode.
• Use

/

to select the
Program
parameter.
• Use

/

to change the program number.
Or:
• Input the program number directly using the keys
0 to 9 and confirm with OK as required.

This takes you into Automatic mode.
Fullness
Value range: Upper fullness: 0 to 16
Lower fullness: 0 to -6
• Use the keys 0 to 16 to select the desired value.
• Use the
+/- key to select upper or lower fullness.
Or:
• Use the second pedal to select the fullness, if fitted.