Dürkopp Adler 650-16, Operating Instructions Manual

Page: 44 / 150

Control with the OP3000 control panel
42 Operating Instructions 650-16 - 02.0 - 08/2016
5.4.1 Quick access function (softkey menu)
Here you have quick access to functions during the sewing pro-
cess and can also assign a function to the upper softkey.
To use the quick access function:
1. Press the lower softkey .

The following information is shown on the display:
Fig. 20: Quick access function (softkey-Menu)
2. Call up a function:
• Press the numeric key under the designed function.
OR
Assigning a function to the upper softkey:
• Press the numeric key under the designed function and
at the same time press the upper softkey.

The function is assigned to the upper softkey and can be
called up by pressing the key.
3. Press ESC to exit the menu.
Symbol Meaning
Manual bartack
• Press the key 1 and keep it pressed for a manual bar-
tack.
Bartack suppression on/off
• Press the key 2 .
The bartacks are switched on or off.
Needle position up / down
• Press the key 3 .
If sewing is stopped within the seam, the needle is
positioned up or down.