Assembling the neat seam beginning (NSB)
Additional Instructions M-TYPE DELTA - 00.0 - 05/2020
15
33. Connect valve connectors at PCB A2 (14).
• Y1: yellow/green slot
X25
• Y2: gray/pink slot
X26
• Y3: brown/white slot
X27
2.5
Activating the NSB in the software
The NSB must be activated by setting the corresponding parameters on
the control panel.
Order
1.
Complete the presettings outside of the machine (
2.
Check/adjust the cutting pressure (
3.
Check/adjust the clamping spring pressure (
4.
Assemble the NSB (
5.
Activate the NSB.
To activate the NSB in the software:
1.
Log in as a technician.
User: technician
Password: 25483
2.
Open the menu
Navigation >
Settings >
Machine Configuration >
Needle Thread Clamp
and press the
neat seam beginning
button.
3.
Set the parameter
t 01 30
to
On
.
4.
Press the
button to exit the menu.
