Assembling the neat seam beginning (NSB)
Additional Instructions M-TYPE DELTA - 00.0 - 05/2020
9
2.4
Assembling the NSB into the machine
Order
1.
Complete the presettings outside of the machine (
2.
Check/adjust the cutting pressure (
3.
Check/adjust the clamping spring pressure (
4.
Assemble the NSB.
5.
Activate the NSB (
To assemble the NSB into the machine:
Important
• Adjust the stitch length to 0.1
• Do NOT switch off the machine
• Lock the sewing feet in place
• Press the Service Stop key
1.
Remove the throat plate slide.
2.
Disassemble the throat plate (
Service Instructions
).
3.
Disassemble the feed dog (
Service Instructions
).
4.
Disassemble the short thread trimmer knife (
Service Instructions
).
5.
Tilt the machine head.
Fig. 6: Assembling the NSB into the machine (1)
6.
Insert the NSB from the bottom.
7.
Tighten the NSB (1) using the screws.
8.
Erect the machine head.
(1)
- Screws
①
