DURKOPP ADLER 911-211, Service Instructions Manual

Page: 124 / 200

Programming
123 Service Instructions 911-211 - 02.0 - 10/2016
PP2 - Insertion mode
Symbol Meaning
Insertion mode
The following options can be set:
Mode 1 (Def.)
Clamp is opened in the loading position. The clamp is closed when the
pedal is pressed. Pressing the pedal again starts sewing of the seam.
Mode 2
Clamp is opened in the loading position. Pressing the pedal closes the left
part of the two-piece clamp for angle mounting. Pressing the pedal again
closes the right part. Pressing the pedal again starts sewing of the seam.
Mode 3
Clamp is opened in the loading position. Pressing the pedal closes the right
part of the two-piece clamp for angle mounting. Pressing the pedal again
closes the left part. Pressing the pedal again starts sewing of the seam.
Mode 4
Quick-start mode:
Clamp is opened in the loading position. The clamp is closed and sewing of
the seam is started when the pedal is pressed. With the alternating clamp
the seam is automatically started after insertion.
This mode is only active when quick-start is enabled in the machine param-
eters. The machine must be switched off and on in order to enable the
quick-start mode.
Mode 5
Clamp is remains closed in the loading position. Pressing the pedal again
starts sewing of the seam.
Loading position
(On/Off)
With the loading position activated the clamps move to the desired position
for convenient insertion of the sewing material.
Loading position X
The value range varies depending on the subclass and sewing field size.
Loading position Y
The value range varies depending on the subclass and sewing field size.